Plane bearing installation method and precautions

Pay attention to the following points when installing flat bearings:

1. Distinguish the tight ring and loose ring of the bearing (according to the inner diameter of the bearing, the hole diameter is 0.1-0.3mm).

2. Distinguish the static parts of the mechanism (ie, parts that do not move, mainly refers to the assembly).

3. In any case, the loose ring of the bearing should always rest on the end face of the stationary part.

The above is the introduction of the plane bearing installation method and the precautions. The seemingly simple thing is also the place where people often make mistakes. However, such mistakes should be avoided as much as possible, because once the error occurs, the bearing is susceptible to damage, which in turn affects the work. Therefore, the most important point about the problem of planar bearing installation is to remember the correct position of looseness and tightness.
For more products, please visit: http://www.bearingkingdom.com