How to maintain the engraving machine track?

 The track of the engraving machine is divided into circular rails and linear guides (also known as square rails). If the machine is like a human, then these tracks are the feet that people can move freely! It can be seen that the track plays a leading role in the engraving machine and has a vital influence on the flexible operation of the engraving machine! The quality of the track directly affects the efficiency of the work, and even affects the engraving effect of the entire product!
    The track is divided into a round rail and a square rail. The so-called round rail is a cylindrical linear guide, which is produced by China. The bearing capacity is relatively high, the cost is relatively low, the production cycle is short, and it is easy to install. Therefore, many processors have chosen to replace the square linear guide. The circular rail needs limited support and the rigidity is also poor. When it takes a long time, there will be deviations, and the error will be larger than the square track. The square rail refers to a square linear guide. It is produced by foreign countries. Its positioning accuracy is high, and the friction coefficient is small, so it can maintain its accuracy for a long time. In particular, its static friction and dynamic friction are very small, and the equipment is driven. Low horsepower demand can save a lot of energy. Most of the tracks on the market today use imported raw materials, and their prices are relatively expensive.
    In order to improve work efficiency and reduce costs, we must pay more attention to the maintenance details of the track. Different maintenance methods are required for different engraving machines. Guide rails for engraving machines such as advertising engraving machines, wood engraving machines, and machining centers. The maintenance method is as follows: It is required to clean the X, Y and Z axis guide surfaces after each operation, to clean all the chips and dirt on the track, and secondly to check whether the rail surface is scratched or not. After cleaning, add lubricant to the rail to facilitate the next day's work.
    Stone engraving machine track maintenance method: Because the stone engraving machine often uses water, the machine is relatively moist, and the track must be maintained every day. Care must be taken when servicing X, Y, Z three-axis polished rod oil; high-speed butter must be used in the screw part; if the working environment temperature is too low in winter, screw, polished rod, square rail or circular guide The parts should be washed and cleaned with gasoline first, and then added with oil. Otherwise, the resistance of the machine transmission part will be too large and the machine will be misaligned.
    Note: No matter which type of engraving machine must be paid attention to before maintenance, first turn off all the power, check whether it is still powered, and confirm that there is no safety hazard before proceeding to the next step! ! When you are designing your work, don't forget to take care of our homeland - the earth, we advocate the greening of the carving industry.