Is the advertising word laser cutting machine maintained daily?

1. Before starting the machine every day, carefully check the pressure conditions of the laser operating gas and the cutting gas. If the gas pressure is not available, it should be replaced in time.

2. Check if the X-axis zero point, Y-axis zero point, Z-axis zero point, laser preparation status, etc. are damaged, (check the indicator light).

3. Check whether the zero point of the X-axis, Y-axis, and Z-axis, the limit switch, and the mounting screw of the collision block are loose, and the limit switches of each axis are active.

4. Check if the circulating water level inside the chiller is satisfied. If it is lacking, it is necessary to increase it in time.

5. Check whether there is any leakage in the circulating water path of the external light path. It is necessary to deal with the leakage in time, otherwise it will affect the life of the optical lens.

6. After the laser cutting machine is cut and finished every day, check the focusing mirror lens for damage.

7. Check if the elastic skin cavity of the external light path is burnt or damaged.

8. After the laser cutting machine is finished every day, cut and cut the waste in time, clean the job site, and insist on the regular and clean work site. Do a good job of cleaning the equipment together to ensure that all parts of the equipment are clean and free of smudging, and that no parts can be placed in any part of the equipment.

9. After the laser cutting machine operation is completed every day, the drain valve of the air reservoir at the bottom of the air compressor is turned over for drainage. After the wastewater is discharged, the drain valve is closed.

10. After the laser cutting machine is finished every day, shut down according to the shutdown process, and then turn off the total power of the entire machine.