Failure Analysis of Engraving Machine Weihong Control System
Mechanical failure analysis of the Weihong system of the engraving machine:
One: one or three axes do not move or move abnormally
1: The control card is loose or faulty.
2: The drive of the corresponding axis is faulty.
3: The corresponding axis stepping motor is faulty.
4: The corresponding coupling is broken or loose.
5: The corresponding screw breaks or the screw nut fails.
6: The corresponding axis slips quickly.
7: The number of subdivisions, current, and settings in the software are different.
Two: z-axis out of control
1: The control card is loose or faulty.
2: Static interference.
3: z-axis motor line failure
4: The file path is incorrect
5: Inverter interference
6: The computer system has a problem or a virus
7: Operation error
