There are many market signage materials in the advertising industry, such as acrylic, PVC, two-color board, MDF, Buddhist version, and imitation mahogany and imitation marble advertising signs produced by the company. Although the materials are different, the setting of the advertising engraving machine is There is no difference in the quality of the production. It is often expressed in the processing technology of the late engraving. Based on the focus of the peers, we introduce the imitation mahogany and imitation marble advertising signs produced by Chengdu Shencai Sign Factory as an example. Report, for the advertising design, advertising production, arts and crafts, supplies, decoration and decoration industry colleagues reference
Series introduction three: color filling process
The imitation mahogany and imitation marble advertising sign products produced by engraving machine are made of high-density fiberboard as the base material. Through the blanking molding, the latest technology of Japan is used to produce the natural texture with natural mahogany and marble, which has strong visual impact. New advertising signage. The product has easy carving, easy coloring and excellent adhesion. The product has been surface treated. Therefore, it is not necessary to process the surface after the coloring of the engraved parts in the later stage, so the operation is simple, the processing cost is low, and there is no Deformation, no odor, good moisture resistance and so on. However, since the material is fiberboard after all, it is not easy to paint the acrylic material, so the novice often feels difficult.
One of the tricks: when engraving machine engraving, set the choice of three-dimensional engraving (some people say: two-dimensional semi-engraving) as much as possible, and select a 90-degree cone knife for engraving, which visually weakens the roughness of the engraved surface of the fiberboard. .
Tip 2: When engraving machine engraving settings, do not appear layered engraving, set to the best depth at one time, can be achieved by changing the tool. This is because the layered engraving will have a stack of marks, which affects the smoothness of the paint on the engraved parts.
Tip 3: Since the surface of the workpiece is affixed with a sticky note before engraving, you can operate with confidence when filling. Directly use the brush to fill the color, save paint, save labor, the effect is not bad.
Tip 4: When using self-painting to fill the color, spray the paint on the paper cup for 15 minutes, then fill it with a brush. Otherwise, the highly corrosive thinner from the paint will damage the paint surface of the workpiece.
