The use of laser engraving machines can improve the efficiency of engraving, reduce the temperature of the non-metallic materials being carved, and reduce the deformation and internal stress of the engraved objects.
So what issues should you pay attention to when using the laser engraving machine? The author has compiled 8 notes and hopes to help everyone.
First, after each boot, it is necessary to check whether the submersible pump can discharge water. If it does not discharge water, it is forbidden to start the work: and ensure that the circulating water has moderate water temperature and water quality, it must be free of impurities and change the circulating water regularly.
2. When using the eagle, you must turn the fan over to avoid contaminating the lens and focusing mirror.
3. It is strictly forbidden to place flammable or explosive materials on the left side of the equipment; when the machine is working, it is necessary to cover the top cover of the machine to prevent laser misalignment from causing fire or injury.
4. When the voltage is unstable, stop the power on. If there are special conditions, use a voltage regulator.
5. During the working process, the operator must check the working condition of the machine at any time, such as whether the paper laid on the hook can be blocked by the air pump, the abnormal sound of the machine, the water temperature of the circulating water, and so on.
6. The environment in which the machine is located is free of pollution, no strong electricity, strong magnetic interference, etc.
Seven, the continuous use of laser engraving machine working time should not exceed 5 hours, the machine needs half an hour in the middle.
8. It is forbidden to turn on the maximum state of the ammeter to avoid breakdown of the laser power.
