SKF grease for all important applications

Core Tip: Standard Grease LGMT2 This is a multi-purpose grease for a wide range of industrial and automotive applications. Agricultural machinery, automotive wheel bearings, transport aircraft, small electric motors.
Standard grease
LGMT 2 This is a multi-purpose grease for a wide range of industrial and automotive applications. Agricultural machinery, automotive wheel bearings, transport aircraft, small electric motors.
LGEP 2 EP grease for a wide range of industrial and automotive applications. Pulping machine, rolling mill random, traction motor for railway, sluice.
LGLT 2 low temperature grease for high speed and low noise applications. Textile machine rotating spindles, machine axes, instruments and control equipment, small electric machines for medical and dental equipment.
LGHQ 3 high temperature, low noise grease for electric motor bearings. Ventilation fan, clutch release bearing, kiln dry loading frame and roller running continuously above 80 °C.
LGWA 2 This is a grease with a wide temperature range and extremely long service life. Wheel bearings, washing machines, electric motors for cars and trucks.
LGFC 2 USDA H1 compatible with food. Baking equipment, food processing equipment, multi-packaged box bearings, packaging machines, conveyor bearings.
Special grease
LGMT 3 universal grease, suitable for a wide range of applications such as LGMT 2, requires high consistency. Bearings > Shaft size 100 mm rotating outer ring vertical shaft application continuous maximum room temperature > 35 °c.
LGLC 2 low temperature grease for high speed and moderate load applications. Machine tool shaft, textile machine rotating spindle.
LGMB 2 Heavy Industry EP Grease. Suitable for hot rolling mill work 琨 bearings, high load support bearings, bearings used in squat support straighteners.
LGHB 2 EP grease for high temperature industrial applications. The maximum resistance temperature of the sealed spherical roller bearings of the pulper and paper machine, the asphalt vibrating screen machine and the continuous plating machine under the high temperature operation of over 150 °C is +200 °C.
LGEM 2 two-fluidized molybdenum EP grease for industrial and heavy equipment applications. Rolling element bearings run steel at low speeds and very high loads in steel bearings, jaw crushers, track laying machines, crane door hanging wheels, construction machinery such as motorized hoes, crane arms, crane hooks, etc.
LGEV 2 Molybdenum EP grease for industrial and heavy equipment applications. Cross-head bearing on the drum Support and thrust roller, bucket wheel excavator, slewing bearing, high-pressure rolling mill on the rotary kiln and rotary dryer.
LGWM 1 low temperature EP grease for windmills and screw conveyors.https://www.supplyforever.com/

How to repair the water pump bearing

Core Tips: (1) The pump that is newly put into use must be replaced with grease (oil) after 100 hours of operation, and then replaced once every 500 hours. (2) Flow bearing lubricated with grease
(1) The pump that is newly put into use must be replaced with grease (oil) after 100 hours of operation, and then replaced once every 500 hours.
(2) Lubricating grease-lubricated flow bearings should be replaced after 1500 hours of operation. The amount of oil to be filled should not be too much or too little, because too much or too little grease will cause the bearing to heat up. It is preferably 1/2 to 2/3 of the volume of the bearing chamber.
(3) For bearings lubricated with lubricating oil, the amount of oil should be added to the specified position.
(4) The container containing lubricating oil or grease should be clean and should be sealed properly. There should be no dust, iron filings and other debris to avoid damage to the bearing.
(5) Motor bearings generally use sodium-based grease, which is characterized by high temperature resistance (125 ° C), but is easily soluble in water, so it can not be used for lubrication of water pump bearings.https://www.supplyforever.com/