CNC carpenter carving machine can not absorb the countertop, no suction, can not absorb the plate, what is the reason, how to deal with? By inquiring about our technical staff, we have provided the following advice to this friend. If the carpenter's enamel machine is not adsorbed, the vacuum pump will not turn without suction or rotation. It should be handled as follows:
1. Is the motor line voltage normal?
2. Whether the water circulation air pump has less water, whether the motor is stuck or not, and the rotating shaft of the motor fan protection net is removed;
3. Filter blocking in the vacuum pump;
4. The surface of the table or pipe is trimmed by air leakage;
5. Forward and reverse the motor U V W Any two wires change the motor direction.
Most of the CNC carpenter carving machines use vacuum adsorption to fix the plates, so that not only can they be firmly fixed, but they will not be moved and slanted, and they will be fixed relative to the splint, which can save the plates and sculpt the edges of the plates. This requires customers to have an understanding of the vacuum adsorption system, better use of CNC carpenter carving machine equipment for production.
