A good machine is inseparable from daily maintenance and attention during use. As a woodworking engraving machine with a wide range of applications in the field of engraving, maintenance problems are often forgotten by operators when used. In this case, it is easy to cause a decrease in the service life of the machine, and it will also cause some inconvenience to daily production. Today, Xiaobian will introduce some maintenance knowledge about this machine.
First of all, woodworking engraving machine manufacturers here remind everyone that to maintain this engraving machine, a very important point is the cleaning problem of the machine. Not only the cleaning of the machine tool track, but also the cleaning of the concave side beside the track, otherwise it will affect the running track of the machine tool track. Of course, in addition to the track, the screw can not be ignored. This mechanical part determines the intensive reading of the engraving of the knife and the cooperation of the whole machine. If the lead screw cannot be cleaned well, if there is a foreign object, it will affect the intensive reading of the engraving.
In addition to cleaning, there is oil. It is very important to oil on a good engraving machine. The lubricating oil of the selected one is better, otherwise it will be easy to rust, and the long-term non-lubrication will make the machine stupid and not flexible enough. After lubricating the machine, it is necessary to carry out the activities back and forth so that the lubricating oil can be fully immersed on the surface of the machine for complete lubrication.
