1. The top of the jack is less than the limit switch, and it can be corrected.
2. The drive line is not in good contact. Try to fix the drive line firmly.
3. The limit switch line is not connected, and the line can be connected.
4, the limit switch is broken, you can change it.
When the engraving machine sets the origin, it sometimes shifts forward or offset to the right and the offset distance is uncertain.
1. The limit switch fails. When the system returns to the system origin, the limit switch is closed and popped open. Change the limit switch.
2. The drive line is loose. Try to fix it tight.
The spindle motor suddenly stops or slows down during the operation of the engraving machine
1. The operating voltage is unstable or overloaded, and a voltage regulator can be added.
2. Check if the middle line is connected and whether the line is desoldered.
The engraving machine cannot be engraved at the origin
1. Whether the layout size of the file matches the machine.
2. Check if offset (OFFSET) is set and the layout is correct.
Engraving machine application knowledge
There are two types of computer engraving machines: laser engraving and mechanical engraving. Both of these types have high power and low power. Because the application range of engraving machine is very wide, it is necessary to understand the most suitable application range of various engraving machines: 1. Badge: low-power laser engraving machine (engraving machine), high-power or low-power computer engraving machine; Building model: large and small power computer engraving machine; 3, metal (mold, chapter, etc.) processing: large and small power computer engraving machine (high power due to more cutting each time and save time); 4, crystal word production: High-power laser engraving machine (50W or more), high-power mechanical engraving machine; 5. Wood, plexiglass, artificial stone and other signs production: high-power mechanical engraving machine; 6, display, exhibition model production: high-power, large-format mechanical engraving machine.
