Maintenance of forklift clutch release bearing

The engine does not disintegrate the oil filling method. First open the clutch cover to check the wear of the separated bearing. If it is confirmed that the bearing is not damaged or the wear is not over the limit, remove the clutch pedal, adjust the connecting rod pin, and return the separating bearing and its seat back. In the final position, fill the hole in the bearing housing with a grease gun until the bearing overflows. Then turn the bearing slightly, refill the oil, repeat the above work until there is a little butter around the bearing, and then turn the bearing. Observe the amount of oil. If there is resistance to the rotation of the bearing, it is proved that the bearing is filled with butter. Then remove a small amount of butter that has spilled over the separation housing and reinstall the removed pin and clutch cover.
The oil-filling method of engine disintegration exposes the engine to the assembly of the separation bearing and the bearing housing, and uses a grease gun to fill the small oil hole below the inner ring of the separation bearing housing. When the bearing has a butter overflow, the bearing is rotated until the bearing has a ring. The butter can overflow.
For more products, please visit: http://www.supplyforever.com/