How to avoid a fire in the bearing heating remover

There are four main reasons for the fire in the bearing heating disassembler: placing the energized bearing heating disassembler on the combustible material or placing it near the inflammable material, causing fire under the long-time high temperature baking; the bearing heating disassembler is not installed with the plug Directly insert the wire head into the socket, which is easy to cause a short circuit and cause a fire; the user does not remove the plug of the bearing heating detacher when leaving, the time is too long, causing the bearing heating detacher to overheat and lead the adjacent combustible material The fire caused by the burning; the resistance wire is used after repeated repairs, which may cause the line to be overloaded and cause a fire.

Therefore, when in use, it is not allowed to place flammable and explosive materials near the bearing heating detacher, and a certain safe distance must be maintained. The bearing heating detacher must be placed on the non-heat-conducting non-combustible material base; the safety interception flow of the bearing heating detacher wire must meet the capacity requirements of the bearing heating detacher, and the industrial bearing heating detacher must be installed separately under any circumstances. Circuit. The wire must be installed with a plug. The wire head should not be directly inserted into the socket. The bearing heating and disassembler wire should be replaced in time. The bearing heating and disassembler without the fuse in the circuit should not be used. The bearing heating disassembler must be taken care of when leaving. Unplug the plug. In the course of use, if there is a power outage, you should also pull out the plug in time, and don't forget it.

For resistance wire repaired many times, it is better not to use it, and a new resistance wire should be replaced. Inflammable and explosive materials are strictly prohibited to be dried by bearing heating and disassembling device; the electric oven should have a device for controlling temperature, which is to prevent the temperature from being too high and prevent the baking time from being too long.
For more products, please visit: http://www.supplyforever.com/